Advanced functions
14
EN
Other settings
Select the Other settings option from the Picture menu and press OK to display the
menu.
The
Other settings menu appears with the following options:
Automatic format: automatically applies the appropriate format to the picture. Check
this box by pressing
OK to enable this function.
Note:This function is only available for certain audio-visual sources.
Photo Mode: improves quality and stability of still pictures.When this function is enabled
still pictures are detected automatically and their resolution enhanced. Check the box to
enable this function by pressing
OK.
Note:This function is only available for certain audio-visual sources.
Film mode: detects that the programme being broadcast is a film and enhances picture
quality. Select an option from the list using the buttons:
-
Off: function disabled,
-
On: detection,
-
Advanced: detection, then enhancement of picture quality.
Notes:
- The
Advanced option is selected by default.
- This function is only available for certain audio-visual sources.
Tint: is used to adjust the picture’s tint.
Note:This function is only available for NTSC audio-visual sources.
Auto skin tone: improves skin tone rendering. Check the box to enable this function by
pressing
OK.
Note:This function is only available for NTSC audio-visual sources.
In PC mode (VGA), the Other settings option allows you to access following functions :
Auto-adjustment: this function is used to automatically adjust the Phase and Clock
functions. Press OK to start the adjustment process and wait until Done appears.
Phase, Clock: adjust these settings as required in order to enhance picture quality.
Horizontal position: use the buttons to move the picture horizontally on the
screen.
Vertical position: use the buttons to move the picture vertically on the screen.
Press
EXIT to close the menu.To return to the Picture menu, select Return and press
OK to confirm.
Return
Automatic format þ
Photo Mode þ
Film mode Advanced...
Tint ¨
Auto skin tone þ
Other settings
Return
Auto-adjustment Start
Phase ¨
Clock
Vertical position
Horizontal position
Other settings
TV mode - Full screen and Single
PC mode - Full screen and Single
To Next Page
Loading...
