15
Advanced functions
EN
Setting the time
The Time menu can be used to set the time on the TV set and program the automatic
sleep timer or wake-up timer functions.
Display the
OVERVIEW menu by pressing the MENU button. Select the Time option
and press
OK to confirm.
Setting the time
1. Select the Clock reference programme option.
2. Select a channel with Teletext which can provide the time to be used as a reference
using the buttons, or enter a channel number using the numeric buttons on the
remote control.The time is displayed after a few seconds if it is available on the
selected channel.
If the time is not provided by Teletext the
Wake-up timer function is not available
and a message prompts you to change reference channel or enter the time manually.
You do this by selecting the
Time and date option and entering the time using the
numeric buttons or the buttons.
Note: If the power supply is disrupted (i.e. the set is switched off using the on/off button or
unplugged, or there is an electrical fault), the time will disappear if it has been entered manually.
You must reset it.We therefore recommend you find the time on a channel and check that it is
correct.
Once the time has been set you can use the Wake-up timer function.
Programming the sleep timer
1. Select the Sleep timer option.
2. Set an automatic shut-off time (from 0 to 4 hours in 5-minute intervals) by using the
buttons. Set the time to 00:00 to disable this function.
Note:You can access this function directly by pressing the SLEEP button on your remote
control.
When the sleep timer is on, a message appears one minute before the television set goes
into standby mode. Press any button on the remote control to cancel standby mode.
Programming the wake-up timer
This function can be used to set the time for the set to come on, for instance, for the
television to wake you up.
1. Select the Wake-up timer option and press OK to check the box, which enables
this function and provides access to the relevant options.
2. Under the Wake-up time option enter the wake-up time using the numeric or
buttons.
3. Under the Switch on for option, use the buttons to set the period of time
(from 5 minutes to 4 hours in intervals of 5 minutes).
4. Under the Programme number option enter the number of the channel you want
to wake you using the or numeric buttons.You can also select an AV programme
using the
AV button. In this case, make sure you programme the equipment connected
to the AV socket to come on as well.
5. For a daily wake-up check the box for the Daily option by pressing OK.
6. Press EXIT to close the menu.
7. Put the TV set into standby mode using the button on the remote control.
The TV set will automatically come on at the programmed time if you do not interrupt it
by using the remote control. Once the TV set is on:
- you can use all its functions as normal;
- you can put the TV into standby mode. In this case, the
Wake-up timer function is
disabled for the relevant day;
- if the channel or AV programme selected from the menu is locked you need to enter your
code to access it.
Return
Sleep timer ¨ 00:15
Clock reference programme 02
Time and date 12:34 03/03/03
Wake-up timer þ
Wake-up time 07:00
Switch on for 01:00
Programme number 10 CNN
Daily
oo
Time
To Next Page
Loading...
