Advanced functions
16
EN
Parental control
The parental control functions allow you to limit your children’s access to the television.
You can do this by locking the buttons on your TV set, thereby barring access to certain
channels and/or AV programmes.These functions are protected using a PIN code.
1. Display the OVERVIEW menu by pressing the MENU button. Select the Parental
control option and press OK to confirm.
2. If the parental control function is not on, follow the instructions on the screen to
access the menu.
If it is on, the
Pwd menu appears. Enter your 4-digit code to access the menu. On the
screen the numbers are replaced with asterisks.The
Parental control menu
appears.
Locking a channel or AV programme
1. Select the Parental Control Settings option from the Parental control menu
and press
OK.The relevant menu appears.
2. Under the Programme option use the buttons, numeric or PR+/PR- buttons
to select the channel to be locked. Use the buttons or press the
AV button to
access the AV programmes.
Note: Only the AV1, AV2 and AV3 (depending on model) programmes can be locked.
3. Check the Programme Lock box by pressing OK.
4. Select the Return option and press OK to return to the Parental control menu.
5. If the parental control is already on, press EXIT to close the menu.
if it is not on, select the
Activate parental control option and press OK.The
Activ. menu appears. Enter a 4-digit code, then enter it again to confirm it. Press
EXIT to close the menu.
To unlock the channel or AV programme, go to the
Parental control menu by entering
your code, select the
Parental control settings option and press OK. Select the
Programme lock option and uncheck the box by pressing OK. Press EXIT to close
the menu.
Locking the buttons on the TV set
1. Select the Parental control settings option from the Parental control menu
and press
OK.
2. Select the Lock front panel option and check the box by pressing OK.
3. Select the Return option and press OK to go back to Parental Control menu.
4. If the parental control is already on, press EXIT to close the menu.
If it is not on, select the
Activate parental control option and press OK. The
Activ. menu appears. Enter a 4-digit code, then enter it again to confirm it.A message
appears saying that the parental control is on. Press
EXIT to close the menu.
Note:The remote control is needed to be able to use the television.
To cancel the lock, go to the Parental control menu by entering your code, select the
Parental control settings option and press OK. Select the Lock front panel
option and uncheck the box by pressing OK. Press EXIT to close the menu.
Operation (TV mode)
- To watch a channel or AV programme which is locked, try accessing it and follow the
procedure on the screen.The lock will be applied again when you put the television in
standby.
In the list of programmes, channels and/or AV programmes which are temporarily
unlocked are indicated by an open green padlock.
- The parental control function must be enabled without fail in order to be able to apply
a lock.To do this you need to select the
Activate parental control option from
the
Parental control menu to define a personal code.
- Whenever you enable the parental control function by defining a personal code you
have to enter your code to access the
Parental control and Installation menus,
even if there is no lock on.
ÐÐ
Return
Activate parental control ¨ ...
Parental control settings ...
Parental control
Press à or ¨ to enter password and activate the
parental control.
Return
Programme 01 TF1
Programme lock ¨ þ
Lock front panel þ
To lock or unlock the selected programme,
press à or ¨.
To Next Page
Loading...
