E-DOC-CTC-20090507-0002 v1.0
6
1 Installation
1.2.1 Manual Installation
Procedure
Proceed as follows:
1 Connect the cables
2 Configure the Thomson Gateway
Connect the cables
Proceed as follows:
1 Connect the Thomson Gateway to the DSL line.
2 Connect the power supply.
3 Turn on the Thomson Gateway.
4 Connect your computer to the Thomson Gateway as described in ”1.3 Adding a New Computer to your
Network” on page 7.
Configure the Thomson Gateway
You are now ready to configure your Internet connection and local network.
Proceed as follows:
1 Open your web browser, and browse to http://dsldevice.lan
or to the IP address of your Thomson
Gateway (by default: 192.168.1.254).
2 The Thomson Gateway GUI appears. Click the Thomson Gateway menu item on the left-hand side.
3 The Thomson Gateway page appears. In the Pick a task list, click Setup.
4 The Easy Setup wizard appears. This wizard will guide you through the configuration of your Thomson
Gateway.
5 Click Next and follow the instructions.
6 After running the Easy Setup wizard, you are connected to the Internet.
For more information, see ” Setting up your Thomson Gateway” on page 45.
To Next Page
Loading...
