THOMSON TG580 - Adding Rules for the Address Based Filter

E-DOC-CTC-20090507-0002 v1.0
38
5 Internet Security
5.2.1 Adding Rules For The Address Based Filter
Options
With the address based filter you can:
 Deny access to a specific Web site
 Allow access to a specific Web site
Deny access to a specific Web site
Proceed as follows:
1 Browse to the Thomson Gateway GUI.
2 On the Toolbox menu, click Web Site Filtering.
3 Make sure the Use Address Based Filter check box is selected.
4 Type the URL of the Web site you want to block (for example “mail.provider.com”) in the Web Site box.
5 In the Action list, click Block.
6 Click Add.
Allow access to a specific Web site
Proceed as follows:
1 Browse to the Thomson Gateway GUI.
2 On the Toolbox menu, click Web Site Filtering.
3 Make sure the Use Address Based Filter check box is selected.
4 Type the URL of the Web site you want to allow (for example “netbanking.bank.com”) in the Web Site
box.
5 Click Allow in the Action list.
6 Click Add.