E-DOC-CTC-20090507-0002 v1.0
19
3 Wireless Access
Make sure that the WLAN LED is blinking amber when you start WPS on your wireless client. If you still have
trouble connecting to the Thomson Gateway, try connecting your wireless client without WPS. For more
information, see ”3.2 Connecting Your Wireless Client without WPS” on page 20.
Troubleshooting
If you are having trouble connecting your wireless client via WPS, try to configure it manually. For more
information, see ”3.2 Connecting Your Wireless Client without WPS” on page 20.
To Next Page
Loading...
