E-DOC-CTC-20090507-0002 v1.0
85
6 Thomson Gateway GUI
3 In the WPA-PSK Version list, click the desired WPA-PSK version.
WPA2:
WPA2 is the most secure version, but not all wireless clients already support it. Before you select
this version, make sure all of your wireless clients support it.
WPA+WPA2:
If not all of your wireless clients support WPA2 or you are not sure if they support WPA2, we
recommend you to choose WPA+WPA2. Wireless clients that support WPA2 will use WPA2, the
others will use WPA.
WPA:
If none of your wireless clients support WPA2 choose this option.
4 Click Apply to immediately apply your changes.
5 Configure your wireless client(s) with the same settings.
The default WEP key and the default WPA-PSK key are printed on the Thomson Gateway
bottom label.
Before configuring the Thomson Gateway encryption, make sure you know which
encryption methods are supported by your wireless client.
To Next Page
Loading...
