4 Computer Interface
DC310028
4.3.1.1.2 Get User Limit Current
Command: DC3100_getLimitCurrent
Parameter: None
Response: Current limit in Ampere
Description: Returns the current limit.
4.3.1.1.3 Set Maximum Current Limit
Command: DC3100_setMaxLimit
Parameter: Maximum current limit in ampere
Response: None
Description: Sets the LEDs maximum current limit in ampere. This limit
should only be set in case a new LED was installed.
4.3.1.1.4 Get Maximum Current Limit
Command: DC3100_getMaxLimit
Parameter: None
Response: Maximum current limit in ampere
Description: Returns the current limit.
4.3.1.1.5 Set Maximum Frequency
Command: DC3100_setMaxFrequency
Parameter: Maximum frequency in MHz
Response: None
Description: Sets the maximum frequency in MHz. This limit should only be
set in case a new LED was installed.
4.3.1.1.6 Get Maximum Frequency
Command: DC3100_getMaxFrequency
Parameter: None
Response: Maximum frequency in MHz
Description: Returns the LEDs maximum frequency.
4.3.1.1.7 Set Operation Mode
Command: DC3100_setOperationMode
Parameter: Operation Mode
Response: None
Description: Sets the operation mode.
4.3.1.1.8 Get Operation Mode
Command: DC3100_getOperationMode
Parameter: None
Response: Actual operation mode
Description: Returns the operation mode.