1 General Information
DC31004
1
General Information
The LED modulating system (DC3100 series) is designed for frequency domain
Fluorescence Lifetime Imaging (FLIM) and other microscopy applications that
require modulated high-power LED illumination sources.
The compact LED driver in the DC3100 series can supply a high current (up to 1A)
to high-power LEDs. The DC3100 series system includes an optical head,
modulating electronics, and a heat sink designed to dissipate the heat generated by
high-power LEDs. The design of the head allows the user to mount any compatible
star-shaped PCB packaged LED.
Please refer to chapter Fluorescence Lifetime Imaging for application notes.
1.1
Safety
ATTENTION
All statements regarding safety of operation and technical data in this
instruction manual will only apply when the unit is operated correctly.
Before applying power to your DC3100 system, make sure that the
protective conductor of the 3 conductor mains power cord is correctly
connected to the protective earth contact of the socket outlet!
Improper grounding can cause electric shock with damages to your health
or even death!
The DC3100 must not be operated in explosion endangered environments!
The LED head, control inputs and outputs must only be connected with duly
shielded connection cables.
Only with written consent from Thorlabs may changes to single components
be carried out or components not supplied by Thorlabs be used.
Do not obstruct the air ventilation slots in housing!
Do not remove covers!
Refer servicing to qualified personal!
This precision device is only dispatchable if duly packed into the complete
original packaging including the plastic form parts. If necessary, ask for a
replacement package.
Mobile telephones, cellular phones or other radio transmitters are not to be
used within the range of three meters of this unit since the electromagnetic
field intensity may then exceed the maximum allowed disturbance values
according to IEC 61326-1.
This product has been tested and found to comply with the limits according
to IEC 61326-1 for using connection cables shorter than 3 meters (9.8 feet).
To Next Page
Loading...
Need help?
General
