What to do if my THORLABS DC3100 Lighting Equipment shows an Over Temperature Error?
If your THORLABS Lighting Equipment displays an Over Temperature Error, it means the internal temperature has reached its maximum limit, and the LED has been switched off. Ensure that the ventilation slots are not blocked to allow proper air circulation through the DC3100 unit.
Why can't I switch on the LED on my THORLABS DC3100?
If the LED on your THORLABS Lighting Equipment cannot be switched on, verify that the LED current is set to a value greater than 0mA. Also, ensure that one of the three operation modes is selected before attempting to switch on the LEDs.
What to do if my THORLABS DC3100 Lighting Equipment shows 'Clipped to Limit Error'?
If your THORLABS Lighting Equipment shows a 'Clipped to Limit Error', it indicates that the LED current has been reduced to the set current limit. To resolve this, decrease the input voltage.
General| Brand | THORLABS |
|---|---|
| Model | DC3100 Series |
| Category | Lighting Equipment |
| Language | English |
To Next Page
