3 Operating the DC3100
DC310018
Figure 20 Autorun Menu
NOTE
Please be aware that you need a VISA engine installed on your system to operate
the DC3100 remote application.
3.2.1.2
Installing VISA Runtime Engine
A VISA runtime 4.3.0 or higher has to be installed on your system to operate the
DC3100 remote application.
You may install the National Instruments©® VISA runtime engine provided on the
installation CD. You may also download the latest NI-VISA runtime engine from the
National Instruments©® web site (www.ni.com/visa).
In case you want to use the VISA engine provided on the installation CD select "NI-
VISA Engine". An installation wizard will be started. If you are running Windows
VISTA©® you might be prompted to change to the "elevated mode". Please ask
your administrator for help when you do not have administrator privileges.
Follow the instructions of the installation wizard.