4 Computer Interface
DC310030
4.3.1.1.17 Set Constant Current
Command: DC3100_setConstCurrent
Parameter: Constant current in Ampere
Response: None
Description: Sets the current in ampere used for the constant current mode.
4.3.1.1.18 Get Constant Current
Command: DC3100_getConstCurrent
Parameter: None
Response: Constant current in ampere
Description: Returns the current in Ampere used for the constant current
mode.
4.3.1.1.19 Set Display Brightness
Command: DC3100_setDispBright
Parameter: Display brightness in percent
Response: None
Description: Sets the display brightness.
4.3.1.1.20 Get Display Brightness
Command: DC3100_getDispBright
Parameter: None
Response: Display brightness in percent
Description: Returns the display brightness.
4.3.1.1.21 Get Status Register
Command: DC3100_getStatusRegister
Parameter: None
Response: Status register value
Description: Reads the content of the instruments status register. Refer to
chapter Status Reporting.
4.3.1.1.22 Error Message
Command: DC3100_errorMessage
Parameter: Error code
Response: User readable message string
Description: This function takes the error code returned by the instrument
driver functions, interprets it and returns it as a user readable
string.
4.3.1.1.23 Identification Query
Command: DC3100_identificationQuery
Parameter: None
Response: Manufacturer name
Device name
Serial number
Firmware revision
Description: This function returns the device identification information.