OPERATING MANUAL TW63 APPENDIX
ThyssenKrupp Aufzugswerke GmbH
Tight-
ness
DIN/
ISO
Tightening
torque
Nm
Brake magnet to housing
Hexagon screw M16 * 120
8.8 4014 150
Machine to machine base frame (version 1 - 3 / 4)
Hexagon screw M20 * 90
Disc 21
Hexagon nut M20
Lock nut M20
8.8
8
4014
125
4032
7967
190 / 350
Tightening torques for mounting parts on the machine base frame
Hexagon screw M 6 * 20 8.8 4017 9
Hexagon screw M10 * 16 8.8 4017 40
Hexagon screw M12 * 35 8.8 4017 75
Hexagon screw M16 * 25 8.8 4017 190
Hexagon screw M16 * 40 8.8 4017 190
Hexagon screw M16 * 80 8.8 4017 190
Detent edged washer SK M10
Detent edged washer SK M12
Detent edged washer SK M16
Note:
Fit the screws, washers and detent edged washers, nuts and lock nuts according to th
details in the drawing enclosed with the base frame and tighten with the specified torq
To Next Page
Loading...
Need help?
General
