TigerStop Standard Controller 5 - Motion Menu Settings; In-Speed Configuration; Out-Speed Configuration; In-Acceleration Setting

35
Motion Menu
in-SPeed
Sets the TigerStop
®
’s top speed when moving towards the tool.
The In-Speed is preset by the factory.
Contact TigerStop
®
Customer Service before adjusting this setting.
out-SPeed
Sets the TigerStop
®
’s top speed when moving away from the tool.
The Out-Speed is preset by the factory.
Contact TigerStop
®
Customer Service before adjusting this setting.
in-acceleRation
Sets the TigerStop
®
’s acceleration when moving towards the tool.
1. Press until reaching the In Accel screen.
2. Enter an acceleration and then press
out-acceleRation
Sets the TigerStop
®
’s acceleration when moving away from the tool.
1. Press until reaching the OutAccel screen.
2. Enter an acceleration and then press
in-deceleRation
Sets the TigerStop
®
’s deceleration when moving towards the tool.
1. Press until reaching the In Decel screen.
2. Enter a deceleration and then press