Toa RM-200SF - VX-3004 F, VX-3008 F, and VX-3016 F Voice Evacuation Frame; Installing VX-015 DA;030 DA;050 DA Digital Power Amplifier Module

3-3
Chapter 3 INSTALLATION AND SETTING PROCEDURES (HARDWARE)
2. VX-3004F, VX-3008F, AND VX-3016F VOICE EVACUATION FRAME
2.1. Installing VX-015DA/030DA/050DA Digital Power Amplifier Module
MultipleDigitalpowerampliermodulescanbeinstalledineachVX-3000Funit.ThenumberoftheDigital
PowerAmpliermodulestobeinstalledandtheirmountingslotportsdifferdependingonthezoneandamplier
modulecongurations.
[Configuration and mounting slot port in the VX-3004F]
Withoutstandbyamplier Withstandbyamplier
1 2 3 4/STANDBY 1 2 3 4/STANDBY
0-Zone
Nocongurationsettable
�
1AB-Zone
�
�
�
2AB-Zone
�
�
�
�
�
3AB-Zone
�
�
�
�
�
�
�
4AB-Zone
�
�
�
�
Nocongurationsettable
[Configuration and mounting slot port in the VX-3008F]
Withoutstandbyamplier Withstandbyamplier
1 2 STANDBY 1 2 STANDBY
8 speaker selectors
Nocongurationsettable
1 Channel, 8 speaker selectors
�
�
�
2 Channels, 8 speaker selectors
�
�
�
�
�
[Configuration and mounting slot port in the VX-3016F]
Withoutstandbyamplier Withstandbyamplier
1 2/STANDBY 1 2/STANDBY
16 speaker selectors
Nocongurationsettable
1 Channel, 16 speaker selectors
�
�
�
2 Channels, 8 speaker selectors
�
�
Nocongurationsettable
Thepowerampliertobeinstalledasastandbyampliermusthavetheratedpoweroutputequaltoorlarger
thanthemaximumoutputofthepoweramplierswhichsharethestandbyamplier.
Legend
�
: Installation required
: Installation not required