Toa RM-200SF - Page 91

3-64
Chapter 3 INSTALLATION AND SETTING PROCEDURES (HARDWARE)
5.1.4. Non-redundant configuration of switching hubs
In the connection example below, both LAN Link A and B terminals of each unit are connected to the same
switching hub.
Notes
• Upto7-levelcascadeisallowedforswitchinghubconnections.
• Afterconnectioncompletion,reactivatetheVX-3000FbypressingtheResetkeyonitsfrontpanel.
VX-3000F
VX-3000F
VX-3000F
VX-3000F
VX-3000F
Switching hub
Switching hub
Note: Contact your TOA dealer for more information on switching hubs.