TOHATSU MFS 20C User Manual

5-60
Power Unit
4st 9.9/15/20 2008
4. Install intake manifold ass’y to cylinder block.
a
6. Attach breather hose 8.
5
1
4
3
2
8
9
Use knock pin a to locate intake manifold ass’y
on the cylinder block.
Intake manifold ass’y securing bolts :
9 N · m (7 lb · ft) [0.9 kgf · m]
5. Secure intake manifold ass’y by tightening bolts in the specified
order to specified torque.
Place wires from magneto on the carburetor as
shown, and put the breather hose on the nipple
located on the breather chamber cover while
holding the wires with the hose.
Then, attach breather hose 9 for carburetor.
E_MFS20C_ch05_090105.qxd 09.1.20 5:25 PM ページ 60

TOHATSU MFS 20C Specifications

General

Brand	TOHATSU
Model	MFS 20C
Category	Outboard Motor
Language	English