7-17
4st 9.9/15/20 2008
7
8) Removing Steering Shaft
1. Remove drive shaft housing by referring to “Chapter 7
Removing Drive Shaft Housing”.
1 When assembling lower mount bracket,
watch arrow mark of lower mount bracket
rubber mount 6.
2 When assembling, watch spigot joint 7 for
installation on the mount bracket.
3. Attach earth wire 8.
8
7
Be careful not to paint earth wire attaching
surface, or the anti-corrosion effect will be
disabled.
E_MFS20C_ch07_081216.qxd 09.1.20 5:40 PM ページ 17