4st 4/5/6 2011
1
5) Tools
Use specified special tools to prevent damaging to parts and
to perform work safely and surely. Be sure to follow
installation procedures described in this manual and use
tightening torque specified.
6) Recommendations on Service
Remove foreign substances and dirt from outboard motor
and individual parts by cleaning. Apply recommended oil or
grease to rotating areas and sliding surfaces. After individual
assembly, always perform verifications such as ensuring
smooth movement and sealing.
1-3
MFS4-5-6Ech01110422.qxd 11.4.22 5:41 PM ページ3
To Next Page
Loading...
Need help?
General
