Bracket
7-14
4st 4/5/6 2011
4) Removal, inspection and installation
of water pipe
1. Remove water pipe 1 from drive shaft housing 2.
2. Check water pipe for crack and damage.
3. Install water pipe 1 into drive shaft housing 2.
1
1
3
2
GREASE
OBM
OBM
OBM
· Apply grease to water pipe grommet (3) before
installation.
· Attach water pipe surely to drive shaft bushing.
OBM
MFS4-5-6Ech07110422.qxd 11.4.22 5:55 PM ページ14