1-10
Service Information
4st 4/5/6 2011
8) Inspection of Stop Switch
1. Press stop switch 1 hard or pull out lock 2 from stop switch
1 to check that engine stops.
1
2
10) Idle Operation
1. After engine has warmed up in neutral, use tachometer to
check idle engine speed is as specified.
Idle Engine Speed :
1,300 r/min
9) Cooling Water Check Port
1. Check that cooling water check port 1 discharges water
during engine runs.
Tachometer :
P/N. 3AC-99010-0
1 High Tension Cord
MFS4-5-6Ech01110422.qxd 11.4.22 5:41 PM ページ10