Tonghui TH9310 Series - Page 53

◇53
SYSTem:PASS To set /inquiry about the time for PASSHOLD
--Syntax:
Command message:
SYST:PASS <time>
Query message:
SYST:PASS?
--Data< rate>:
Data format: float
Data range: 0.3~99.9
Data accuracy: 0.1
Data unit: s
--Example:
Set the PASSHOLD as 1.0s.
Command message: SYST：PASS 1
--Return message
Query message: SYST:PASS?
If the time for PASSHOLD is 1.000,
1.000 is returned.
SYSTem:STEP To set /inquiry about the time for STEPHOLD
--Syntax:
Command message:
SYST:STEP<time>
Query message:
SYST:STEP?
--Data< rate>:
Data format: float
Data range: 0.3~99.9
Data accuracy: 0.1
Data unit: s
--Example:
Set the STEPHOLD as 1.0s.
Command message: :SYST:STEP1
--Return message
Query message: FUNC: :SYST:PASS?
If the time for STEPHOLD is 1.000,
1.000 is returned.
SYSTem:GFI To set /inquiry about the state for GFI
--Syntax:
Command message:
SYST:GFI <ON/OFF> or <1/0>