Tonghui TH9310 Series - Commands for os Setup Function

◇51
FUNC:SOURce:STEP:IR:CH1 To set /inquiry about the milti-channel value
--Data<channel value>:
Data format: character
Data range: HIHG/LOW/OPEN
5.3.6 Commands for OS Setup Function
NOTE: for the basic format, please refer tocommands for AC Setup function.
FUNC:SOURce:STEP:OS:OPEN To set /inquiry about the OPEN rate for OS test
--Syntax:
Command message:
FUNC:SOUR:STEP <sn>:OS:OPEN<rate>
Query message:
FUNC:SOUR:STEP <sn>:OS:OPEN?
--Data<rate>:
Data format: integer
Data range: 10~100
Data accuracy: 1
Data unit:
--Example:
Set the OPEN rate for OS test in STEP1 as 50%.
Command message: FUNC:SOUR:STEP 1:OS:OPEN 50
--Return message
Query message: FUNC:SOUR:STEP 1:OS:OPEN?
If the OPEN rate for OS test in STEP1 is 50.0
50.00 is returned.
FUNC:SOURce:STEP:OS:SHOT To set /inquiry about the SHOT rate for OS test
--Syntax:
Command message:
FUNC:SOUR:STEP <sn>:OS:SHOT<rate>
Query message:
FUNC:SOUR:STEP <sn>:OS:SHOT?
--Data< rate>:
Data format: float
Data range: 0~500
Data accuracy: 10
Data unit:
--Example:
Set the SHOT rate for OS test in STEP1 as 100%.
Command message: FUNC:SOUR:STEP 1:OS:SHOT 100
--Return message
Query message: FUNC:SOUR:STEP 1:OS:SHOT?
If the SHOT rate for OS test in STEP1 is 100.0,