Tonghui TH9310 Series - System Subsystem Commands

◇52
100.0 is returned.
FUNC:SOURce:STEP:OS:GET Outputs the capacitance
Command message:
FUNC:SOUR:STEP <sn>:OS: GET
The instrument will automatically sample the standard capacitance value after impedance transformation
of the current.
5.4 SYSTem Subsystem Commands
NOTE: it is valid only in system setup interface, use command（DISPlay：PAGE SYSTem）to switch.
Command Tree:
SYST
→
：BEEP
0(OFF)/1(SHORT)/2(LONG )
：PASS
0.3-99.9
：STEP
0.3-99.9
：GFI
0/1, (ON/OFF)
：DISP
0 (P/F) , 1 (DATA)
：LANG
0 (Chinese) , 1 (English)
：TURN
0(ON)/1(OFF)
：DELA
0-99.9
：OFFS
1/2/GET, (ON/OFF/GET)
：FAIL
0
(STOP)/1(CONT)/2(REST)/3(NEXT)
：RES
：SMOD
0 (NORMAL) ,1 (FRAME) , 2
(REPEAT)
SYSTem:BEEP To set /inquiry about the BEEP
--Syntax:
Command message:
SYST：BEEP <0(OFF)/1(SHORT)/2(LONG ) >
Query message:
SYST:BEEP?
--Data< OFF/SHORT/LONG>:
Data format: character
Data range: 0~2(0 is OFF, 1 is SHORT, 2 is LONG)
--Example:
Set the BEEP as 1,
Command message: SYST:BEEP 1
--Return message
Query message: SYST: BEEP?
If the volume of BEEP is 1,
1 is returned.