EasyManua.ls Logo

Topcon GPT-7000i Series - Special Accessories; Auto converter AC-6; Battery charger BC-6; Large capacity battery pack BT-3 L

Topcon GPT-7000i Series
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
98
9 POWER SOURCE AND CHARGING
Note: 1 Recharging should take place in a room with an ambient temperature range of
10°C to 40°C (50°F to 10F).
2 If charging is done at high temperature, charging time of the battery may take
longer.
3 Exceeding the specified charging time may shorten the life of the battery and
should be avoided if possible.
4 The battery source will discharge when stored and should be checked before using
with instrument .
5 If you allow the battery to be completely discharged, it will have an effect on the
overall performance for proper charging in the future.
Keep batteries charged at all times..
Do not charge or discharge continuously, otherwise the battery and the charger may be
deteriorated.
If charging is necessary, use the charger after stopping charge for approximately 30 minutes.
Do not charge the battery or discharge the battery in right after the battery is charged, it causes
deterioration of the battery in rare cases.
The charger may develop heat while charging, there is no problem of it.

Table of Contents

Related product manuals