Topcon GPT-7000i Series User Manual

67
4 PARAMETERS SETTING MODE
4.1.2 Communication
Factory default settings are indicated with underlines.
4.1.3 Value Input
4.1.4 Unit
REC TYPE REC-A/REC-B
Select the option to record the data.
REC-A : The measurement is started and new data is output.
REC-B : The data being displayed is output.
NEZ REC FORM
STANDARD/
WITH RAW
Select to record coordinates in standard or 11 digits with raw
data.
S/A BUZZER OFF/ON Select the Audio tone OFF or ON for the Set Audio Mode.
Menu Selecting Item Contents
BAUD RATE
1200
/ 2400 / 4800 /
9600/19200
Select the baud rate.
DATA LENGTH 7
BIT/ 8BIT Select the data length seven digits or eight digits.
PARITY BIT NON/EVEN/
ODD Select the parity bit.
STOP BIT 1
BIT/ 2BIT Select the stop bit.
CR, LF OFF
/ON
Select the option OFF or ON for carriage return and line feed
when collecting measurement data with a computer.
ACK MODE OFF/ON
When communicating to an external device, the protocol for
handshaking can omit the [ACK] coming from the external
device so data is not sent again.
OFF : Omit the [ACK]
ON : Standard
Menu Selecting Item Contents
DIST MEAS
COUNT SET
0~99
N-times measurement set.
Set N (number of times) for times of distance measurement.
When setting number of times as 1 or 0, it is single
measurement.
EDM OFF TIME SET
0~99
The time when EDM is cut off from distance measurement is
completed can be changed.
0 : After completing distance measurement,
EDM is cut off.
1-98 : EDM is cut off after 1~98 minutes.
99 : EDM is always switched ON.
LASER PLUMMET
TIME SET
(Only for Laser
plummet type)
1 -99
Laser plummet function can be turned off automatically.
1-98 : Laser Plummet is cut off after 1 to 98 minutes.
99 : Manual
Menu Selecting Item Contents
TEMP Celsius/Fahrenheit Select the temperature unit for the atmospheric correction.
PRESS hPa/mmHg/inHg Select the air pressure unit for the atmospheric correction .
ANGLE deg / gon / mil
Select degree(360°), gon(400G) or mil (6400M) for the
measuring angle unit to be shown on the display .
DIST m/ft
Select the distance measuring unit Meter or Feet shown on
the display.
FEET
US/
INTERNATIONAL
Select the meter / feet conversion factor.
US survey feet
1m=3.280833333333333 ft.
International feet
1m=3.280839895013123 ft.

Topcon GPT-7000i Series Specifications

General

Brand	Topcon
Model	GPT-7000i Series
Category	Measuring Instruments
Language	English