30
1 NOMENCLATURE AND FUNCTIONS
● Point guide ON/OFF
This feature is most useful when doing stake out work. The Point Guide's red LEDs on the
GPT-7000i Series telescope assist the rod person in getting on-line. The Point Guide feature is fast
and simple to use.
● Signal level mode
The light acceptance quantity level (Signal level) is displayed in this mode.
When reflected light from the prism is received, a buzzer sounds. This function is good for easy
collimation when the target is difficult to find.
The received return signal level is displayed with bar graph as follows.
● Reticle illumination
Select the brightness by sliding [UP-DOWN] slider.
The brightness setting is stored in memory after power is turned off.
To turn on or off the reticle illumination, press the [reticle illumination] icon.
Instrument
Illuminate
Blink
The Point Guide should be used within a distance of
100 meters (328 ft.). The quality of its results will
depend on the weather conditions and the user's
eyesight.
The goal of the rod person is to look at both LEDs
on the instrument and move the prism on-line until
both LEDs become equally bright . If the solid LED
is brighter, move to the right. If the blinking LED is
brighter, move to the left.
Prism
[UP-DOWN] slider
[ON]
[OFF]
[UP-DOWN] slider
Reticle illumination icon
Reticle illumination icon
To Next Page
Loading...
Need help?
General
