Topwisdom TL-403 - 4.4.5 Supplementary Description of Software and CAD Direct Output

泰智科技
Shenzhen Topwisdom Technology Co., Ltd
62
scan
drawing graphic
effect
Fig. 4-31
scan
drawing graphic
effect
Fig. 4-32
From what described above, we may see that for Carving out of vector graphics, filling
is not needed, and there’ll not be this kind of influence between drawings in different
colors, as shown in Figure Fig. 4-33 drawings in different colors are in the relation of
inclusion, no influence on each other. There’s overlay between the two parts of
Carvings. We believe you may have deeper understanding for the Carving modes of
AutoCAD.
scan
drawing graphic
effect
Fig. 4-33
4.4.5 Supplementary Description of Software and CAD Direct
Output
Announcement: This document is mainly purposed to provide some methods of
analysis and solutions for the disorder of the engraving for vector graphics, as the
applications are diversified, some problems cannot be completely solved by our