To Next PageTo Next Page
Need help?Do you have a question about the Topwisdom TL-A1 and is the answer not in the manual?
Details the system's features, capabilities, and specifications for laser engraving and cutting.
Provides crucial safety guidelines, warnings, and precautions for using the system.
Specifies the recommended environmental conditions for operating the laser engraving control system.
Details power supply requirements and essential grounding procedures for safe operation.
Lists and illustrates the accessories included with the TL-A1 laser engraving control system.
Illustrates the electrical connections and layout for the TL-A1 control system.
Provides the physical dimensions and mounting specifications for the control system.
Explains the detailed wiring procedures for various interfaces and connections.
Describes the function and pin assignments of various interfaces on the control system.
Provides an overview of the functions available on the operation panel.
Details the primary graphical interfaces displayed by the control system during operation.
Explains how to input numerical values and parameters via the interface.
Configures parameters specific to each layer of the design for processing.
Allows manual control and movement of the Z and U axes.
Enables previewing the job's working area or range before execution.
Allows selection and management of files for processing from memory or U disk.
Navigates and accesses various system settings and functions through the main menu.
Manages files stored on a USB disk, including reading and writing operations.
Configures settings related to file saving, selection, and work modes.
Controls the movement of individual axes (X, Y, U) for precise positioning.
Adjusts user-specific parameters and settings for system operation.
Configures network settings, including IP address and Wi-Fi mode for connectivity.
Configures the system's behavior for returning axes to their origin points.
Configures settings related to the machine's type, table mode, and laser settings.
Performs diagnostic tests on system components like I/O, Clock, SRAM, and Flash.
Displays statistical data such as power-on time, work time, and total travel.
Accesses administrator settings, including system lock, password, and ID management.
Introduces the rotary cutting machine features and operational modes.
Configures parameters specific to rotary cutting tools, spindle, and lifting mechanisms.
Guides through manual and automatic procedures for presetting cutting heads.
Manages the operation of the spindle and pressure feeding rollers during cutting.
Allows switching between rotary cutting tools and laser cutting modes.
Describes the step-by-step process for performing rotary and laser cutting operations.
Provides specific notes and warnings related to rotary cutting and axis range.
Troubleshoots problems related to system reset, unresponsive buttons, and display issues.
Addresses common questions and issues regarding laser power, intensity, and protection.
Provides solutions for problems encountered when connecting the system to a PC via USB.
Troubleshoots issues related to reading from and writing to USB drives.
Resolves problems with water protection alarms and out-of-range errors during operation.
General| Model | TL-A1 |
|---|---|
| Category | Control Systems |
| Application | Laser Engraving and Cutting Machines |
| Communication | USB |
| Offline Operation | Yes |
| Power Supply | DC 24V |
| File Formats | DST, PLT, BMP, DXF, AI |
