Topwisdom TL-A1 - 2.4 Interface Instruction

泰智科技
Shenzhen Topwisdom Technology Co., Ltd
11
Other inputs are similar.
2.4 Interface Instruction
2.4.1 Power Signal
The system is 24V power supply interface (switching power interface)
Pin
Definition
1
GND 24V power source grounding (Input)
2
+24V 24V power source positive (Input)
2.4.2 PC Connection Port
Label PC connection port. Can connect PC to read and write with USB.
2.4.3 U-DISK Port
U-DISK port is on the top right of panel. It is able to directly insert the U disk to read and write.
2.4.5 Motor Axis Interface
The motor diver includes axis interface of X, Y, Z and U, only supportive of common anode
connection. Among them:
 X: X axis motor
 Y: Y axis motor
 Z: lift motor of rotary cutting; or bidirectional laser motor in case of a double-head
bidirectional mode
 U: Feeding motor or lifting motor
Note: The Z/U axis port is a multiplexed port. To change it, set the “Z/U Option” parameter in
“Equipment Parameters”.
Pin
Definition
1
+5V DC5V output, connect PUL+ and DIR+ of step motor driver
2
PUL- Step pulse, connect to the PUL- of step motor driver
3
DIR- Direction signal, connect to the DIR- of step motor driver