Topwisdom TL-A1 - Part I Overview; 1.1 System Overview

泰智科技
Shenzhen Topwisdom Technology Co., Ltd
1
Part I Overview
1.1 System Overview
Welcome to use the laser engraving control system of our company!
The system is the laser engraving and cutting control system with 3 axes and 1 laser.
The main features of the Control System:
 Power supply of DC24V/2A;
 Use high-performance 32-Bit floating point ARM, 128M Flash, 512K RAM, 2
general outputs, 9 general inputs, TTL electrical level;
 Equipped with 2.4", 320×240 LCD;
 Support 3 axes motor control (X, Y axis used for horizontal motion, Z axis used for
rotary cutter lift or synchronous double-head movement (double-head bidirectional
movement model) , U axis for feeding or platform lift; Z/U axis is multiplexed port;
motor shaft pulse frequency can be as high as 166KHz;
 Adopt 7-segment S-shape acceleration and deceleration and adaptive speed planning
algorithm, and support speed parameter setting and small circle speed limit with one
button; different cutting parameters available for different graphics; support backlash
compensation;
 Support 1 laser control, TTL electrical level, adjustable output voltage of laser
control: 0~5V, adjustable PWM output: 1K~100K, adjustable duty cycle: 0~100%;
 Support USB2.0 interface, support USB communication to computer, support reading
and writing of U disk;
 Support real-time clock, machine lock;
 Support rotary cutting, marked-positioning cutting, rotating cutting height
compensation, pressure feeding roller control;
 Support track preview, continuous engraving after power off, real-time correction of
power light intensity and speed during work, rotary engraving, switching of 2
platforms, split feeding, pressure feeding, automatic blowing, auto focus, foot switch,
safety protection, upgrade, processing statistical information and other functions;
 Support the languages of Chinese (simplified), English, Traditional Chinese, Korean,
Russian, Italian, Spanish, Portuguese, Vietnamese and etc.