Securing the Machine for
T ransport
Important: Do not operate or drive the machine
on roadways. Use care when loading or unloading
the machine into a trailer or truck.
1. Park the machine on a level surface, engage
the parking brake (if applicable), and lower the
grinder .
2. Shut of f the engine and remove the key .
3. Secure the machine to a trailer with chains or
straps using the tie-down/lift loops at the front
and rear of the machine ( Figure 21 and Figure
22 ). Refer to your local ordinances for trailer and
tie-down requirements.
g013180
Figure 21
1. Front tie-down loop
g013181
Figure 22
1. Rear tie-down loops
Lifting the Machine
Y ou can lift the machine using the tie-down/lift loops
as lift points ( Figure 21 and Figure 22 ).
18
To Next Page
Loading...
