g019862
Figure 58
1. Nut 3. T ooth
2. T ooth holder
Cleaning
Removing Debris from the
Machine
Service Interval : After each use
Important: Operating the engine with blocked
screens, dirty or plugged cooling ns, and/or
cooling shrouds removed will result in engine
damage from overheating.
1. Park the machine on a level surface, engage
the parking brake (if applicable), and lower the
grinder .
2. Shut of f the engine, remove the key , and wait
for the engine to cool.
3. Wipe away debris from the air cleaner .
4. Clean any debris buildup on the engine and
muf er with a brush or blower .
Important: It is preferable to blow dirt
out, rather than washing it out. If you use
water , keep it away from electrical items and
hydraulic valves. Do not use a high-pressure
washer . High-pressure washing can damage
the electrical system and hydraulic valves or
deplete grease.
5. Clean debris from the oil cooler .
40
To Next Page
Loading...
