Lubrication
Greasing the Machine
Service Interval : Before each use or daily (Grease
immediately after every washing.)
Grease T ype: General-purpose grease
1. Park the machine on a level surface and lower
the grinder .
2. Shut of f the engine and remove the key .
3. Clean the grease ttings with a rag.
4. Connect a grease gun to each tting ( Figure 25
and Figure 26 ).
5. Pump grease into the ttings until grease begins
to ooze out of the bearings (approximately 3
pumps).
6. Wipe up any excess grease.
g013183
Figure 25
g013184
Figure 26
22
To Next Page
Loading...
