EasyManua.ls Logo

Toro 41179 - User Manual

Toro 41179
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
FormNo.3362-113RevA
Multi-Pro
®
1250TurfSprayer
ModelNo.41179—SerialNo.290000001andUp
ToregisteryourproductordownloadanOperator'sManualorPartsCatalogatnocharge,gotowww.Toro.com.OriginalInstructions(EN)

Table of Contents

Questions and Answers

  • T
    tmacdonaldAug 27, 2025
    Why is the distance reading inaccurate on my Toro 41179 Paint Sprayer?
    • J
      Jennifer SnowAug 27, 2025
      If the distance measurement is inaccurate on your Toro Paint Sprayer, calibrate the speed sensor.
  • H
    Heather WilliamsSep 9, 2025
    What to do if Toro 41179 Paint Sprayer displayed measurements do not make sense?
    • C
      Craig FigueroaSep 9, 2025
      If the displayed measurements on your Toro Paint Sprayer do not make sense, check the Units of Measurement to ensure that it is set correctly because the Units of Measurement is set to a system other than what you expect.
  • S
    Samuel BeckAug 27, 2025
    Why is the Area inaccurate on my Toro Paint Sprayer?
    • K
      Kyle GrimesAug 27, 2025
      If the Area on your Toro Paint Sprayer is inaccurate, check and set the appropriate Width in the calibration mode, because the sprayer width might not be correctly entered. Also, calibrate the speed sensor if it is not calibrated correctly. If problems continue, contact your Authorized Service Dealer because the speed sensor might be damaged.
  • G
    gonzalezwandaSep 18, 2025
    Why does the starter on my Toro 41179 not crank?
    • T
      Tiffany ArellanoSep 18, 2025
      If the starter of your Toro Paint Sprayer does not crank, there are several possible causes: * The range selector might be in a gear other than Neutral. To solve this, press the brake pedal and move the range selector to the Neutral position. * The electrical connections could be corroded or loose. Check the electrical connections to ensure they have good contact. * A fuse might be blown or loose. Correct or replace the fuse. * The battery might be discharged. Charge or replace the battery. * The safety interlock system might be malfunctioning; contact your Authorized Service Dealer. * There might be a broken starter or starter solenoid; contact your Authorized Service Dealer. * Internal engine components might be seized; contact your Authorized Service Dealer.
  • C
    Cynthia WintersSep 13, 2025
    How to fix a Toro 41179 Paint Sprayer when the starter does not crank?
    • C
      clayton62Sep 14, 2025
      If the starter on your Toro Paint Sprayer isn't cranking, make sure to press the brake pedal and shift the range selector to the Neutral position. Also, check the electrical connections to ensure they have good contact. Verify and, if necessary, replace the fuse. Finally, ensure the battery is adequately charged; if not, charge or replace it.
  • M
    Margaret OrrSep 15, 2025
    What to do if my Toro Paint Sprayer will not operate in either direction?
    • K
      Kimberly HarrisSep 15, 2025
      If the Toro Paint Sprayer does not operate in either direction, press the brake and shift the range selector into a gear. Also, release the parking brake or check the linkage.
  • W
    William JamesSep 16, 2025
    Why is the speed on my Toro Paint Sprayer always 0 or erratic?
    • K
      kylereedSep 16, 2025
      If the speed reading is always 0 or erratic on your Toro Paint Sprayer, connect the monitor cable and calibrate the speed sensor.
  • A
    Alexander JacksonSep 16, 2025
    How to fix a boom section that does not spray on my Toro 41179 Paint Sprayer?
    • C
      Christopher ChristensenSep 16, 2025
      If a boom section on your Toro Paint Sprayer does not spray, manually turn the valve off. Disconnect the electrical connector on the valve and clean all leads, then reconnect it. Check the fuses and replace them if necessary. Repair or replace the hose, and adjust the boom by-pass valves.
  • D
    Dennis OwensAug 29, 2025
    What to do if my Toro Sprayer engine cranks but won't start?
    • O
      owilsonAug 29, 2025
      If your Toro Sprayer's engine cranks but doesn't start, the fuel tank might be empty; refill it with fresh fuel. Also, the fuel system might contain dirt, water, or stale fuel, requiring you to drain and flush the system and add fresh fuel. Check for a clogged fuel line and clean or replace it if necessary. Ensure the spark plug lead is connected and replace any damaged or dirty spark plugs.
  • K
    Kim HoltAug 29, 2025
    How to fix a Toro Sprayer engine that starts but doesn't keep running?
    • J
      John CarrAug 29, 2025
      If your Toro Sprayer's engine starts but doesn't keep running, the fuel tank vent might be restricted; try replacing the fuel cap. Dirt or water in the fuel system could also be the cause, so drain and flush the system and add fresh fuel. Additionally, check for a clogged fuel filter and replace it if needed. Inspect for blown or loose fuses and correct or replace them. Also, check and tighten any loose wire connections.

Toro 41179 Specifications

General IconGeneral
Model41179
Power SourceElectric
Max Pressure3000 PSI
Max Flow Rate0.24 GPM
Hose Length25 ft
Spray Tip IncludedYes
TypeAirless
Nozzle Size0.015 in
Product TypePaint Sprayer

Related product manuals