g2241 14
126-5641
1. PT O 4. Operator-presence switch
2. Parking brake
5. See user ’ s guide for
operating condition code
3. Neutral
decal126-7875
126-7875
1. Fuse location 4. Auxiliary , 15A
2. Relay location
5. Start relay
3. Main, 20A 6. Not used
Machines with Side Discharge Only
decal127-0326
127-0326
1. Read the Operator's
Manual .
3. Remove the key and
read the Operator's
Manual before performing
maintenance.
2. Height of cut
Machines with Rear Discharge Only
decal140-1 198
140-1 198
1. Rotate the nut clockwise
to remove.
2. Attention—read the
Operator ’ s Manual .
1 1
To Next Page
Loading...