EasyManua.ls Logo

Toro 72923 - Page 8

Toro 72923
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
decal107-3069
107-3069
1. W arning–there is no rollover protection when the roll bar is
down.
2. T o avoid injury or death from a rollover accident, keep the
roll bar in the fully raised and locked position and wear
the seat belt. Lower the roll bar only when absolutely
necessary; do not wear the seat belt when the roll bar is
down.
3. Read the Operator's Manual ; drive slowly and carefully .
decal109-6036
109-6036
Rear Discharge Machines Only
1. Read the Operator s Manual .
2. Remove the key and read the instructions before servicing
or performing maintenance.
3. Height of cut
decal1 10-2067
1 10-2067
decal1 12-9028
1 12-9028
1. W arning—stay away from moving parts; keep all guards
and shields in place.
decal1 16-8283
1 16-8283
1. W arning—read the Operator's Manual for instructions on
torquing the blade bolt/nut to 75 to 81 N∙m (55 to 60 ft-lb).
decal133-8062
133-8062
8

Table of Contents

Related product manuals