Toro 74990 - Stopping the Machine; Adjusting the Height of Cut

g008952
Figure24
DrivingBackward
1.Movetheleverstothecenter,unlockedposition.
2.Togobackward,slowlypullthemotion-control
leversrearward(Figure25).
g008953
Figure25
StoppingtheMachine
Tostopthemachine,movethetractioncontrollevers
toneutralandmovetolockedposition,disengagethe
powertakeoff(blade-controlswitch(PTO),andturn
theignitionkeytooff.
Settheparkingbrakewhenyouleavethemachine;
refertoSettingtheParkingBrake(page21).
Remembertoremovethekeyfromtheignitionswitch.
CAUTION
Childrenorbystandersmaybeinjuredifthey
moveorattempttooperatethemachinewhile
itisunattended.
Alwaysremovetheignitionkeyandsetthe
parkingbrakewhenleavingthemachine
unattended,evenifjustforafewminutes.
AdjustingtheHeightofCut
UsingtheTransportLock
Thetransportlockhastwopositionsandisused
withthedeck-liftpedal.Thereisalockpositionand
aunlockpositionforthetransportposition.The
transportlockisusedwiththedeck-liftpedal.Refer
toFigure26.
26