Toro Greensmaster Flex 2100 - Installing the Handle Retainers; Installing the Transport Wheels

2
InstallingtheHandleRetainers
Partsneededforthisprocedure:
2Handleretainer
2Hairpincotter
Procedure
1.Whilesupportingthehandle,removethecableties
securingthehandleclampstothesideplates(Figure6).
Figure6
1.Hairpincotter2.Handleretainer
2.Pivotthehandletothedesiredoperatingposition,
insertahandleretaineroverthehandleclampandinto
thematchingholesinthesideplate(Figure6).
3.Securetheclampinpositionwithahairpincotter
(Figure6).
4.Repeattheprocedureontheoppositesideofthe
handle.
5.Adjustthehandleheighttothedesiredposition;refer
toAdjustingtheHandleHeight(page18).
Note:Themachineisshippedwiththehandle
adjustedtothelowestposition.Themachineis
traditionallyoperatedwiththehandletelescopedoutto
itsmaximumheight.
3
InstallingtheTransport
Wheels
Partsneededforthisprocedure:
2
Transportwheels(OptionalTransportWheelKit,
Model04123)
Procedure
1.Pushthekickstanddownwithyourfootinthe
centerofthekickstandandpulluponthelower
centermachinehandleuntilthekickstandhasrotated
forward,overcenter(Figure7).
Figure7
1.Kickstand
2.Pressthewheellockingcliptowardthecenterofwheel
andslidethewheelontothehexshaft(Figure8).
Figure8
1.Lockingclip
11