Toro Groundsmaster 3505-D - Locating the Tie-Down Points; Pushing or Towing the Machine

LocatingtheTie-Down
Points
Therearetiedownslocatedatthefrontandrearsides
ofthemachine(Figure29).
Note:Useproperly-ratedDOT-approvedstrapsin4
cornerstotiedownthemachine.
•2onthefrontoftheoperator'splatform
•Reartire
g192121
g192122
Figure29
1.Tie-downpoint
PushingorTowingthe
Machine
Inanemergency,youcanmovethemachineavery
shortdistancebyactuatingthebypassvalveinthe
hydraulicpumpandpushingortowingthemachine.
Important:Donotpushortowthemachine
fasterthan3to4.8km/h(2to3mph).Ifyoupush
ortowatafasterspeed,internaltransmission
damagemayoccur.Ifyoumustmovethemachine
aconsiderabledistance,transportitonatruck
ortrailer.
Important:Thebypassvalvemustbeopen
wheneveryoupushortowthemachine.Close
thevalveonceyouhavepushedortowedthe
machinetothedesiredlocation.
1.Locatethebypassvalveonthepump(Figure
30)andloosenitbyrotating90°(1/4ofaturn).
g031610
Figure30
1.Bypassvalve
2.Pushortowthemachine.
3.Finishpushingortowingthemachineandclose
thebypassvalvebyrotatingit90°(1/4turn).
Important:Ensurethatthebypassvalveis
closedbeforeyoustarttheengine.Running
theenginewithanopenbypassvalvecauses
thetransmissiontooverheat.
33