Toro Groundsmaster 3505-D - Lubrication Procedures

Lubrication
GreasingtheBearingsand
Bushings
ServiceInterval:Every50hours—Lubricateallofthe
bearingsandbushings.
Every500hours/Yearly(whichevercomesrst)
Themachinehasgreasettingsthatyoumust
lubricateregularlywithNo.2lithiumgrease.Also,
lubricatethemachineimmediatelyafterevery
washing.
Thegreasettinglocationsandquantitiesareas
follows:
•Rearcutting-unitpivot(Figure33)
g008894
Figure33
•Frontcutting-unitpivot(Figure34)
g008895
Figure34
•2sidewinder-cylinderends(Figure35)
g008896
Figure35
•Steeringpivot(Figure36)
g195307
Figure36
•2rearlift-armpivotsandliftcylinder(Figure37)
38