Toro Groundsmaster 3505-D - Cutting Unit and Blade Maintenance

CuttingUnitMaintenance
SeparatingtheCutting
UnitsfromtheTractionUnit
1.Performthepre-maintenanceprocedure;refer
toPreparingtheMachineforMaintenance(page
37).
2.Removethehydraulic-motor-mountingscrews
anddisconnectandremovethehydraulicmotor
fromthecuttingunit(Figure67).
Important:Coverthetopofthespindleto
preventcontamination.
g031644
Figure67
1.Motor-mountingscrews
3.Removethelynchpinorretainingnutsecuring
thecuttingunitcarrierframetothelift-arm-pivot
pin(Figure68).
g031645
Figure68
1.Lynchpin
2.Lift-arm-pivotpin
4.Rollthecuttingunitawayfromthetractionunit.
54