Toro Groundsmaster 3505-D - Drive System Maintenance

DriveSystem
Maintenance
CheckingtheTirePressure
ServiceInterval:Beforeeachuseordaily
DANGER
Lowtirepressuredecreasesmachineside-hill
stability.Thiscouldcausearollover,which
mayresultinpersonalinjuryordeath.
Donotunderinatethetires.
Thecorrectairpressureinthetiresis97to124kPa
(14to18psi)asshowninFigure54.
Important:Maintainpressureinalltiresto
ensureagoodqualityofcutandpropermachine
performance.
Checktheairpressureinallthetiresbefore
operatingthemachine.
g001055
Figure54
CheckingtheTorqueofthe
Wheel-LugNuts
ServiceInterval:Afterthersthour
Aftertherst10hours
Every200hours
Torquethewheel-lugnutsto61to88N∙m(45to65
ft-lb).
WARNING
Failingtomaintainpropertorqueofthe
wheel-lugnutscouldresultinpersonalinjury.
Torquethewheel-lugnutstotheproper
torquevalue.
AdjustingtheTraction
DriveforNeutral
Ifthemachinemoveswhenthetractionpedalisinthe
NEUTRALposition,adjustthetractioncam.
1.Parkthemachineonalevelsurface,lowerthe
cuttingunits,engagetheparkingbrake,shutoff
theengine,andremovethekeyfromtheignition
switch.
2.Chockorblockthefrontandrearwheelsonone
side.
3.Raisetheoppositefrontandrearwheeloffthe
oorandplacesupportblocksundertheframe.
WARNING
Ifthemachineisnotsupported
adequately,itmayaccidentallyfall,
injuringanyoneunderthemachine.
Afrontwheelandarearwheelmustbe
raisedofftheground;otherwise,the
machinewillmoveduringadjustment.
4.Loosenthelocknutonthetractionadjustment
cam(Figure55).
g008922
Figure55
1.Tractionadjustmentcam2.Locknut
WARNING
Theenginemustberunningsothat
youcanmakeanaladjustmentof
thetractionadjustmentcam.Contact
withhotormovingpartscanresultin
personalinjury.
Keepyourhands,feet,face,andother
bodypartsawayfromthemufer,other
hotpartsoftheengine,androtating
parts.
46