GEAR DRIVE SYSTEM
5-41GT Series Tractors Service Manual
5
76. Slide a washer onto the input shaft (Fig. 581). 78. Slide 2 washers onto the input shaft (Fig. 583).
Fig 581 PICT-8290a Fig 583 PICT-8288
79. Install an e-ring onto the input shaft to secure it to
the housing (Fig. 584).
77. Slide the input shaft assembly into the housing (Fig.
582).
Fig 584 PICT-8286Fig 582 PICT-8289
To Next Page
Loading...
