Toro GT series - Page 234

MOWER DECK
7-17GT Series Tractors Service Manual
7
50” Mower Deck Spring Loaded Idler
Replacement
50” Mower Deck Spring Loaded Idler
Removal
18. Install a washer onto the spindle shaft (Fig. 797).
1. Remove the Mower Deck from the Tractor. Refer to
“50” Mower Deck Removal” on page 7-6.
2. Remove the mower deck belt. Refer to “50” Mower
Deck Belt Removal” on page 7-1.
3. Remove the bolt, washer and nut securing the pulley
to the spring loaded idler (Fig. 799).
Fig 797 PICT-8047a
Fig 799 PICT-7955
20. Remove the mower deck spindle from the vise.
19. Secure the spindle shaft and install a nut to secure
the pulley to the mower deck spindle (Fig. 798).
Fig 798 PICT-8046a