Toro GT series - Page 235

MOWER DECK
7-18 GT Series Tractors Service Manual
7
4. Remove the pulley from the idler bracket (Fig. 800). 6. Using a spring tool (Toro part no. 92-5771), unhook
the idler spring from the spring post on the mower
deck (Fig. 802).
Fig 800 PICT-7956
Fig 802 PICT-7960
7. Remove the idler spring from the idler bracket (Fig.
803).
5. Remove the spacer from the idler bracket (Fig. 801).
Fig 803 PICT-7962
Fig 801 PICT-7957