Toro LX Lawn Tractor - Installation

CHASSIS
3-96 LX Lawn Tractor Service Manual
3
12. Pull the throttle/choke assembly out from the rear of
the tower and remove it from the machine (Fig. 365).
Fig 365 PICT-7158
Installation
1. Hook the z-bend of the throttle/choke control cable
into the second hole from the top of the speed
control lever (Fig. 366).
3. Insert the throttle/choke assembly lever into the slot
from the rear of the tower and install 2 screws to
secure the throttle/choke assembly to the tower (Fig.
368).
Fig 366 PICT-9637
Fig 368 PICT-9640
2. Route the throttle/choke cable around the engine to
the back side of the tower (Fig. 367).
Fig 367 PICT-9638a