Toro LX Lawn Tractor - Page 150

HYDROSTATIC DRIVE SYSTEM
6-10 LX Lawn Tractor Service Manual
6
11. Position the ground wire (green) and install the
self tapping screw securing the ground wire to the
linkage bracket (Fig. 522).
13. Position the bypass rod and attach the bypass rod
spring to the transmission bypass lever (Fig. 524).
Fig 522 PICT-7543a
Fig 524 PICT-7578
14. Slide the wheels onto the axles (Fig. 525).
12. Connect the short spring switch wire terminal to the
switch post (Fig. 523).
Fig 525 PICT-7521
Fig 523 PICT-7556