MOWER DECK
7-48 LX Lawn Tractor Service Manual
7
4. Remove the spacer from the spindle shaft (Fig. 726).
Fig 726 PICT-7735a
5. Remove the spindle from the vise.
6. Remove the spindle shaft assembly from the spindle
housing (Fig. 727).
Fig 727 PICT-7738a
8. Press the second bearing out of the blade side of the
housing (Fig. 729).
Note: Since this bearing is staked in place it WILL
be damaged if removed.
Fig 729 PICT-7745a
7. Remove the bearing and 2 spacers from the pulley
side of the housing (Fig. 728).
Fig 728 PICT-7742a
To Next Page
Loading...
