MOWER DECK
7-61LX Lawn Tractor Service Manual
7
7. Remove the bearing and 2 spacers from the pulley
side of the housing (Fig. 779).
9. Inspect the bearings and spacers and replace if
worn or damaged.
10. Press the blade side bearing into the housing (Fig.
781).
Fig 779 PICT-7742a
Fig 781 PICT-7740
8. Press the second bearing out of the blade side of the
housing (Fig. 780).
Note: Since this bearing is staked in place it WILL
be damaged if removed.
Fig 780 PICT-7745a
6. Remove the shoulder spacer from the spindle shaft
(Fig. 778).
Fig 778 PICT-8050a
To Next Page
Loading...
